THE DAD FIELD GUIDE / Car & Garage
How to Change a Flat Tire
The key isn't speed. It's parking somewhere safe, lifting at the right point, and tightening everything correctly before driving.
20–45 minIntermediate7 illustrated steps
THE DAD FIELD GUIDEKNOW HOW / CHANGE FLAT TIRE
A useful skill.
A few clear steps.
A few clear steps.
Clear diagrams, not filler graphics — built to show the part that matters.
What you need
- Vehicle owner's manual
- Correct spare
- Vehicle jack
- Lug wrench
- Wheel chocks
- Torque wrench
Step by step
Step 01
Park away from traffic
Use level, firm ground; hazards on, parking brake set, passengers safely away.
Step 02
Locate the tools and lift point
Check the manual; not every vehicle carries a spare.
Step 03
Chock and loosen
Secure the appropriate wheel and loosen each lug nut about a quarter-turn.
Step 04
Raise only at the approved point
Lift just enough to clear the tire; stay out from beneath the vehicle.
Step 05
Install the spare
Remove the wheel, seat the spare, and hand-thread every lug nut.
Step 06
Lower and torque
Lower the car and tighten in the specified sequence to the stated torque.
Step 07
Check restrictions
Verify pressure and follow temporary-spare speed/distance limits.
Diagrams are schematic overviews, not exact vehicle or product instructions.
← More useful guides